當前位置:希尼爾首頁 > 譯海拾貝
> 譯文欣賞
> 工程圖紙與文檔要求DCS ENGINEERING DRAWINGS AND
DOCUMENTATION REQUIREMENTS
工程圖紙與文檔要求DCS ENGINEERING DRAWINGS AND DOCUMENTATION REQUIREMENTS
原創文章:青島希尼爾翻譯公司 http://www.myfavoritepainters.net
2014-11-16
(非保密內容)
1. GENERAL
概述
The Distributed Control
System vendor shall include detailed engineeing, including application
programming (configuration) and custom graphics displays in his scope
of supply. Delivery shall include all drawings and documentation listed in
this standard.
分布式控制系統的供應商必須提供詳細的工程設計,包括應用程序(配置)和自定義圖形顯示。交貨內容包括本標準列出的所有圖紙和文檔。
a) All drawings provided
by the vendor shall be computer generated using “AUTOCAD”
software ( version: AutoCAD 2007,
minimum), unless otherwise approved by the
Owner. Vendor shall supply drawing files on CD ROM as well as hard copies of
all drawings.
非另外征得業主的批準,供應商提供的所有圖紙必須是在電腦上采用“AUTOCAD”(版本:AutoCAD
2007,最低要求)軟件制成的。供應商必須將圖紙文件以及所有圖紙的硬拷貝保存在CD ROM上提供。
All drawing formats
and contents shall be as specified by the owner in the relevant project
standards, unless otherwise approved.
除非另外征得批準,所有圖紙的格式與內容必須符合業主在相關項目標準中的規定。
b) All
other instrumentation
documentation shall be
computer generated using
database, spreadsheet or word processing software, as applicable. Software
specified to be used shall be the latest version of
MS-ACCESS, MS-EXCEL, MS-WORD. Any other software for documentation must
first be reviewed and approved in writing by the Owner’s Instrument
Engineer. Vendor shall supply document files on CD ROM as well as hard
copies of all documents.
其它所有儀器文檔均必須在電腦上采用適用的數據庫、電子制表軟件或文字處理軟件制成。規定采用的軟件必須是最新版本的,如MS-ACCESS、MS-EXCEL、MS-WORD。如果采用其它任何文檔軟件必須首先進行審查并征得業主儀表工程師的書面批準。供應商必須將文檔文件以及所有文檔的硬拷貝保存在CD
ROM上提供。
All documentation
formats and contents shall be as specified by the owner in the relevant
project standards, unless otherwise approved.
除非另外征得批準,所有文檔的格式與內容必須符合業主在相關項目標準中的規定。
c) Multiple issues of drawings and
documentation and at various levels will be made over the course of the
project, as determined by the project requirements and
procedures. Final drawings and documents shall 100% complete, accurate, any
“HOLD” clearly identified (generally there should be no HOLD’s at this
point) and be issued as “Certified for Construction”. Vendors shall be fully
responsible for timely removal of any and all HOLD’s placed on his drawings
and documentation.
2. LIST OF
DRAWINGS
Item No. |
Drawing Type |
Description |
1 |
System
Architecture Schematic |
Single line
schematic of the complete system |
2 |
I/O
Termination Cabinet Drawings |
Detailed internal layouts of the
I/O termination and cross connection cabinets |
3 |
Rack
Room Hardware Cabinet
Drawings |
Detailed internal layouts of the
rack room equipment cabinets |
4 |
Control
Room Equipment enclosure Drawings |
Detailed internal layouts of the
control room equipment consoles and cabinets |
5 |
System AC and
DC Power Supply Drawings |
Complete details of all DC and AC
power cabling and wiring |
6 |
Inter-Equipment/Cabinet Wiring/Cable
Schematics |
Complete
details of all inter-cabinet, console, peripherals, etc. cabling and
wiring, including interfaces to control/monitoring systems supplied
by others |
7 |
System Grounding Drawings |
Complete details of all system
grounding |
8 |
Equipment, Cabinets,
Consoles, etc. Dimensional Drawings |
Certified dimensional drawings of
all cabinets, consoles, peripherals, furniture, etc. |
9 |
I/O Mapping Drawings |
System hardware input/output
assignment maps |
10 |
Configuration Drawings |
Loop sheets
or similar drawings detailing the complete operating software
configuration for all areas |
11 |
Simulation Drawings |
Loop sheets
or similar drawings detailing the complete simulation software
configuration for all areas |
12 |
Custom Graphics Drawings |
Color reproductions of all custom
graphics pages |
2. 圖紙目錄
項目標準
自動化
項目編號 |
圖紙名稱 |
說明 |
1 |
系統結構示意圖 |
整個系統的單線示意圖 |
2 |
I/O端子柜圖 |
I/O端接和交叉式接線柜詳細內部布局圖 |
3 |
機架室硬件柜圖 |
機架室設備柜詳細內部布局圖 |
4 |
控制室設備外殼圖 |
控制室設備控制臺和設備柜詳細內部布局圖 |
5 |
系統交流和直流電源圖 |
所有直流和交流電源電纜與電線布線的完整詳圖 |
6 |
設備/機柜之間的電線/電纜示意圖 |
所有機柜/控制臺、外圍設備等之間的完整詳圖,包括由其他方提供的控制/監控系統接口 |
7 |
系統接地圖 |
所有系統接地的完整詳圖 |
8 |
設備、機柜、控制臺等的尺寸圖 |
所有機柜、控制臺、外圍設備、裝置等經確認的尺寸圖 |
9 |
I/O映射圖 |
系統硬件輸入/輸出分配圖 |
10 |
配置圖 |
對所有區域的全套操作軟件配置進行詳細說明的回路圖表或類似的圖紙 |
11 |
模擬圖 |
對所有區域的全套模擬軟件配置進行詳細說明的回路圖表或類似的圖紙 |
12 |
自定義圖形圖紙 |
所有自定義圖紙頁面的色彩再現 |
3. LIST OF
DOCUMENTS
Item No. |
Document Type |
Description |
1. |
Schedule |
Time schedule of
engineering, manufacturing, testing, delivering, installing,
checking out and commissioning of the complete
system hardware and software |
2. |
List
of Drawing
and Documents |
This list shall identify all
drawings and documents produced, listed
in
numerical order
by drawing/document number and have description and work
package number (as applicable). The drawing list shall be provided
as a complete list at the start of the project. |
3. |
Documentation
Deliverable Schedule |
Schedule of all
drawings/documents, sorted by drawing / document
number and listing: drawing/document number,
description, issue stage (i.e.:
Preliminary, Review, Approval, Certified),
status, scheduled issue date, actual issued date, document package
number, work package number. This list shall be maintained on a monthly basis
(or more frequently as required by the project). |
4. |
Site Installation Manuals |
Details of all system
installation requirements and recommendations |
5. |
Equipment
Heat Loading Tables |
Heat loading values for all
system equipment |
6. |
Equipment
Power usage Tables |
Power usage values for all system
equipment |
7. |
Equipment Weight Tables |
Physical weights for all
equipment, cabinets, consoles, peripherals, etc. |
8. |
I/O Assignment Lists |
Termination listings for all
configured system inputs and outputs, including cross connections |
9. |
System
cable/wiring Schedules |
Schedules of all system cables
and wiring excluding I/O wiring |
10. |
Tag Lists |
Listing of all configured tags
including all related data |
11. |
Console configuration
documentation |
All documentation related to
configuration of the operator consoles |
12. |
Program listings and Source codes |
Program listings and source codes
for all control software |
13. |
System loading calculations |
Calculations
showing all of the system’s RAM and hard drive usage, CPU free
times, bus activities, etc. |
3. 文檔目錄
項目編號 |
文檔名稱 |
說明 |
1. |
日程計劃 |
整個系統硬件與軟件設計、制造、測試、交貨、安裝、檢驗、試運行的日程計劃 |
2. |
圖紙文件目錄 |
該目錄應確定所有圖紙和文件,按照圖紙/文件編號的數字順序排列,并且附說明和工作包編號(若有)。項目開始時,必須提供完整的圖紙目錄。 |
3. |
文檔交付日程計劃 |
所有圖紙/文檔的日程計劃,按照圖紙/文檔的 編號和目錄分類:圖紙/文檔編號、說明、發行階段(即:預審、審查、批準、確認)、計劃發布日期、實際發布日期、文件包編號、工作包編號。必須每月(或者按照項目要求確定更高的頻率)制定該目錄。 |
4. |
現場安裝手冊 |
所有系統安裝要求和建議的詳細內容 |
5. |
設備熱負荷表格 |
所有系統設備的熱負荷值 |
6. |
設備用電量表格 |
所有系統設備的用電量 |
7. |
設備重量表格 |
所有設備、機柜、控制臺、外圍設備的物理重量 |
8. |
I/O分配目錄 |
所有配置系統輸入和輸出的端接列表,包括交叉連接 |
9. |
系統電纜/電線布局圖 |
所有系統電纜和電線的布局圖,不包括I/O配線 |
10. |
標簽列表 |
所有配置標簽的立標,包括所有相關數據 |
11. |
控制臺配置文檔 |
與操作員控制臺配置有關的所有文檔 |
12. |
程序表與源代碼 |
用于所有控制軟件的程序表和源代碼 |
13. |
系統加載計算 |
有關所有系統RAM和硬盤使用、CPU空閑時間、總線活動性的計算 |